Oil Pressing Machinery
Nebraska Screw Press has a variety of oil pressing machinery available for various oil pressing requirements. Made of high-grade material, these machines deliver excellent performance and are easy to use, durable, and require negligible maintenance. Available at competitive prices, our machines are available in a wide variety of capacities and specifications. Our Goyum presses weigh 3-4 times the comparable Chinese equipment per rated ton (though that is also overrated) and are much more heavy-duty compared to these units. Be warned about inferior-quality equipment, no matter where it comes from!
Oilpress part presses
For more Information on OPP oil machines, please download the price list PDFs below:
Goyum 10
Capacity: 1 ton per day
With a capacity of 1 ton per day, the Goyum 10 is a cost-effective solution for small and pilot applications. These expellers require minimum maintenance and are easy to operate. The Goyum 10 is a time-proven design that uses the same components as larger commercial machines, providing scalable results for pilot applications, unlike other small oil presses. The press can be run by wide or V belts driven by PTO, electric, or diesel motors.
The main body and base are made out of high-grade quality cast iron. It has a single reduction gearbox with spur gears and a fabricated chamber with three sections. The sizes of the chamber are as follows: 3.5 inches in diameter x 20 inches long. The worm assembly is case hardened to ensure it withstands heavy loading, which results in a superior quality of oil and cake. This machine is easy to operate and requires low maintenance, which makes it ideal for both personal and small business use.
| Integrated Cooker: | Single stage with or without heating arrangement (as required) |
| High Capacity: | 1 ton per day (capacity differs with material density and quantity of oil in the seed.) |
| Length | Height |
| 1300mm | 1075mm |
Goyum 20
Capacity: 2-3 tons per day
The Goyum 20 utilized the same time-proven design of our smaller Goyum 10 units. This machine comes complete with a seed cooking and cooling unit that can utilize steam, hot or chilled water, or electricity.
The main body and base of the Goyum 20 are made out of high-grade quality cast iron. It has a single reduction gearbox with spur gears and a fabricated chamber with three sections. The size of the chamber is as follows: 4 inches in diameter x 24 inches long. The worm assembly is case hardened to ensure it withstands heavy loading, which results in a superior quality of oil and cake. The cake thickness cannot be adjusted while the machine is running. This machine is easy to operate and requires very little maintenance.
| Integrated Cooker: | Single stage with or without steam heating arrangement (as required) |
| High Capacity: | 2 tons per day (capacity differs with material density and quantity of oil in the seed.) |
| Length | Height |
| 2185mm (86") | 1422mm (56") |
Goyum 30
Capacity: 3 to 4 tons per day
The main body and base of the Goyum 30 are made out of high grade, quality steel. It has a triple reduction gear box with helical gears and a cast steel chamber of four sections. The sizes of the chamber are as follows: 4 inches in diameter x 26 inches long. The worm assembly is case hardened to ensure it withstands heavy loading, which results in a superior quality of oil and cake. The thickness of the cake can be adjusted while running. This machine takes less installation space than normal machines, is easy to use, and requires very little maintenance.
The seed cooker and conditioner is included and integrated into the machine design. This is an excellent machine for pilot testing that will provide scalable results to standard commercial scale machines. The Goyum 30 design is identical to the Goyum 100 and 150 machines, with the exception of feed cramming. Cage bars are hinged for easy maintenance.
| Feeding drum heating: | Single stage, double stage with or without steam heating arrangement (as required) |
| High Capacity: | 3 to 4 tons per day. Capacity differs with material density and quantity of oil in the seed. |
| Length | Height |
| 1625mm (5'4") | 1397mm (4'7") |
Goyum 30 MK-I
Capacity: 3 tons per day
Compact and easy-to-maintain, the Goyum 30 MK-I is made of high quality steel and has a steel casted chamber. The screw is hard faced. It is a belt-less expeller, thus fitted with a 2.5 hp geared electric motor. Thickness of the cake can be adjusted while machine is running. This machine is user- friendly, maintenance free and requires less space. Cage bars are hinged for easy maintenance.
The Goyum MK-I is an excellent choice for pilot and small scale applications and includes an integrated cooker that can heat or chill seeds as required using a variety of energy inputs. As with all of our machines, the MK-I can utilize a variety of voltages as specified by the customer and bars are adjustable to accommodate the entire spectrum of oilseeds.
| High Capacity: | 3 tons per day. Capacity differs with material density and quantity of oil in the seed. |
| Length | Height |
| 2135mm (5'4") | 1500mm (4'11") |
Goyum 60
Capacity: 5-6 ton per day
Designed for high productivity and heavy-duty performance, the technically advanced Goyum 60 provides effective and economical solutions to agro-industries for oil pressing. With a crushing capacity of 6 tons per day, the Goyum 60 is designed to outperform its competition in energy efficiency. The cast iron structure provides durability and corrosion resistance.
The main body and base are made out of high grade quality cast iron to provide long life and stability. It has a double reduction gear box with steel casted helical gears and a quill worm separate drive. The steel fabricated chambers are horizontally hinged. The screw is case hardened to ensure it withstands heavy loading, which results in a superior quality of oil and cake. The Goyum 60 is a time proven design that provides excellent valve.
| Feeding Drum: | single stage cooker, 26" diameter |
| High Capacity: | 5-6 tons per day (capacity differs with material density and quantity of oil in the seed.) |
| Length | Height |
| 2900mm (9'6") | 2150mm (7'0.6") |
Goyum MK-III
Capacity: 8 to 10 tons per day
The Goyum MK-III is designed to provide solutions for industrial production of oil. This machine is made of premium quality materials to ensure effectiveness and ease-of-operations.
The base is made out of high grade quality steel. It has a double reduction gear box with steel fabricated gears and chamber. The sizes of the frames are as follows: 6 inches diameter x 33 inches long and 7 inches diameter x 44 inches long. The worm assembly and cone point are case hardened, which results in a superior quality of oil and cake. The main worm shaft can be withdrawn without disturbing the gear box. The crammer shaft allows for extra cramming of the seed or cake in the feed body. A two stage pre-conditioner is integrated into the machine design.
| Feeding Drum: | 2 high-steam jackets of 42" diameter for efficient cooking of seed. Pipe fitting contains all required accessories. |
| High Capacity: | 8 to 10 tons per day (Capacity differs with material density and the quantity of oil in the seed) |
| Length | Height |
| 2640mm (8'8") | 2743mm (9') |
Goyum Mk-III-C
Capacity: 8 - 10 tons per day
The base and body of the Goyum MK-III-C are made out of high grade quality steel. It has a double reduction gear box with steel casted helical gears and a cast steel chamber that is vertically hinged. The three sections in the chamber have a combined length of 33 inches. The thickness of the cake can be adjusted as desired. The worm assembly is case hardened with a hard faced discharge ring and sliding ring. The main worm shaft can be withdrawn without disturbing the gear box. The crammer shaft allows for extra cramming of the seed or cake in the feed body. This machine requires very little maintenance and produces superior oil and cake. (Shown with single stage tempering chamber.)
| Feeding Drum: | 2 high-steam jackets of 42" diameter for efficient cooking of seed. Pipe fitting contains safety valve, steam spray pipe, pressure gauge, steam valves, and steam traps. |
| High Capacity: | 8 to 10 tons per day (Capacity differs with material density and the quantity of oil in the seed) |
| 2175mm (7'2") | 1100mm(3'7") | 1200mm (3'11") |
Goyum 100
Capacity: 10 tons per day
The Goyum 100 is a premium all steel machine of contemporary design. The main body and base are made out of high grade quality steel. It has a double reduction gear box with steel casted helical gears and a cast steel chamber with four sections. The sizes of the vertically hinged chamber are as follows: 6 inches diameter x 37 inches long. The worm assembly is case hardened with hard faced discharge ring and compression ring. The thickness of the cake can be adjusted while the machine is running. The main worm shaft can be withdrawn without disturbing the gear box. The crammer shaft allows for extra cramming of the seed or cake in the feed body. This machine is easy to use and requires very little maintenance.
| Feeding Drum: | 2 high-steam jackets of 42" diameter for efficient cooking of seed. Pipe fitting contains safety valve, steam spray pipe, pressure gauge, steam valve, and steam traps. |
| High Capacity: | 8 to 10 tons per day (Capacity differs with material density and the quantity of oil in the seed) |
| Length | Height |
| 2900mm | 2150mm |
| Expeller ---- 2800 kg Double jacketed kettle with gearbox and motor ---- 1100 kg |
Goyum MK-IV
The Goyum MK-IV is designed to provide a cost-effective solution for industrial production of oil. This machine is made of premium quality materials to ensure long life and ease-of-operations. It has a steel fabricated base and a double reduction gear box with a cast iron body and steel fabricated gear. The chamber is assembled from plate and frames of the following sizes: 7 inches diameter x 44 inches long. The worm assembly is case hardened and cone point, which results in a superior quality of oil and cake. The main worm shaft can be withdrawn without disturbing the gear box. The crammer shaft allows for extra cramming of the seed or cake in the feed body. The two stage conditioner is integrated into the machine design.
| Feeding Drum: | 2 high-steam jackets of 42" diameter for efficient cooking of seed. Pipe fitting contains all required accessories. |
| High Capacity: | 15 tons per day (Capacity differs with material density and the quantity of oil in the seed) |
| Length | Height |
| 2640mm (8'8") | 2743mm (9') |
Goyum 150
Capacity: 15 tons per day
The Goyum 150 is the flagship machine of Goyum Screw Press that provides outstanding valve in it's operation and design. The main body and base are made out of high grade quality steel. It has a double reduction gear box with steel casted helical gears and a cast steel chamber with four sections. The sizes of the vertically hinged chamber are as follows: 6 inches diameter x 37 inches long. The worm assembly is case hardened a with hard faced discharge and compression ring.The thickness of the cake can be adjusted while the machine is running. The main worm shaft can be withdrawn without disturbing the gear box. The crammer shaft allows for extra cramming of the seed or cake in the feed body. This machine is easy to use, requires very little maintenance and includes an integrated 3 stage cooker. The Goyum 150 provides outstanding value for its capacity and guarantees long life service.
| Feeding Drum: | 3 high-steam jackets of 48" diameter for efficient cooking of seed. Pipe fitting contains safety valve, steam spray pipe, pressure gauge, steam stop valve, and steam traps. |
| High Capacity: | 15 to 20 tons per day (Capacity differs with material density and the quantity of oil in the seed) |
| Length | Height |
| 2640mm (8'8") | 3403mm (11'4") |
| Expeller ---- 4000 kg Triple jacketed kettle with gearbox and motor ---- 1800 kg |
Goyum 600
Capacity: 30 tons per day
Having a crushing capacity of 30 tons per day, the Goyum 600 has a simple and symmetrical shape. Made of high quality materials on the line of modern technologies, Goyum 600 can be used for high crushing capacity oil millers and features a long case design for efficient oil removal.
The main body and base of the Goyum 600 are fabricated from mild steel. It has a triple reduction gear box with steel casted helical gears and pinion shafts of special steel. The gearbox is aligned with all the bodies on a single fabricated base. It has two vertically hinged cast steel chambers, each is 36س long. The worm assembly, discharge ring and compression ring are all hard faced. The cake thickness can be adjusted while the machine is running. The main worm shaft can be withdrawn without disturbing the gear box. The shaft water is cooled. The crammer shaft allows for extra cramming of the seed or cake in the feed body and is completely supported on bearings.
| Feeding Drum: | 5 high-steam jackets of 66" diameter for efficient cooking of seed. Pipe fitting contains safety valve, steam spray pipes, pressure gauge, steam valves and steam traps. Exhaust fan is also provided to extract excess steam or moisture from cooking chambers. Kettle is supported separately on a fabricated structure. |
| High Capacity: | 50 to 60 tons per 24 hours in pre-pressing and 30 tons in single and final crushing (capacity differs with material density and quantity of oil) |